• Admin

DIY Woven Dog Bed | Buy or DIY

Updated: Apr 12, 2019

With a woven bed above and a cozy pillow below, this custom dog bed is sure to be puppy love!

If you’re short on space but still want a cozy spot for your dog to call his own, we invite you to think outside the box. With trendy boho fringe and a solid wood frame, this bed offers two levels for your dog to relax in his own personalized corner. Follow these instructions below, and let your dog have his day!

Keep in mind this project was built for a small dog who likes to jump up and go low to hide. This is why we made it a two-story bed project. This project could be tweaked for larger dogs who wants their bed closer to the ground. Simply make the height shorter and the length much longer!

Shopping Cart



3 Pieces: 2”x2”x8’ Select Pine (https://amzn.to/2MxnNEF)

1 Piece: 1”x2”x2’ Select Pine (https://amzn.to/2vzuZti)

25 x 3” Flathead Wood Screws (https://amzn.to/2KHrHsZ)

4 x 2” Flathead Wood Screws (https://amzn.to/2AW67kD)

12 x 1 ¼” Wood Screws (https://amzn.to/2vydB8d)

Tuscan Varathane Wood Stain (https://amzn.to/2AVZWNA)

16 ⅞” x 18 ¾” Smooth One Side ¼” Ply (https://amzn.to/2AXMB7i)

White Acrylic Paint (https://amzn.to/2KF0ffa)

¾ Yard Black Cotton Material (https://amzn.to/2KF1Rpe)

¾ Yard Grey Cotton Material (https://amzn.to/2AYpxp6)

6 Yards Copper/Black Decorative String (https://amzn.to/2KCCsMR)

1 Yard Fun Fur (https://amzn.to/2KEmpOQ)

1 Yard Cotton Fabric (https://amzn.to/2vwKz94)

Thread (https://amzn.to/2OpSZGs)

Pillow Insert (https://amzn.to/2KF5dIQ)

Batting (https://amzn.to/2M9zXGV)


Disposable Gloves (https://amzn.to/2KHXfP9)

Cloth Rags (https://amzn.to/2McfhxU)

Wood Filler (https://amzn.to/2AXptWJ)

Wood Glue (https://amzn.to/2OlSbm0)

Sandpaper 120 Grit or Finer (https://amzn.to/2vxhNVY)

⅛” Drill Bit (https://amzn.to/2AXpNVr)

Small Robertson Bit (https://amzn.to/2McfpNU)

Power Drill (https://amzn.to/2MeiAER)

Mitre Saw (https://amzn.to/2Oo4M7U)

Painter’s Tape (https://amzn.to/2Mgh2dp)

Needle (https://amzn.to/2OUTCsB)

Iron (https://amzn.to/2KGQCMW)

Fabric Scissors (https://amzn.to/2KFLFUW)

Ruler (https://amzn.to/2OplXGm)

Fabric Measuring Tape (https://amzn.to/2KEKZiy)

Pencil (https://amzn.to/2KF7qE9)

Straight Pins (https://amzn.to/2AXAeby)

Saw Cuts

2 - 22” - [2 x 2] - Back Uprights

2 - 18” - [2 x 2] - Front Uprights

5 - 16” - Front and Back Cross Pieces

4 - 14” - Sides

2 - 11 ½” - [1 x 2 ]- Upper Rail Sides

2 - 11 ½” - [2 x 2] - Upper Rail Sides

2 - 5 ½” (Longest Point)- [2 x 2] - Mitred Trapezoid to 45٥ Angled Front Pieces. These should be cut from the end of the long piece of 2 X 2 so your fingers are not too close to the blade. The Goal of the Exercise Is to Have Ten Digits at the End of the DIY!

Step By Step Guide

Did you know!? The Full Step By Step instructions are available for FREE at https://www.thecoralchannel.com/buyordiy! Just sign up for access to exclusive DIY plans, builds, and footage!